DataMet Tablet Extra long jaw caliper Industry 4.0
0–800 to 0–3500 mm | 0.0005 mm MICRON / 0.01 mm Resolution | ±30 to ±240 μm Accuracy | 400 / 600 / 1000 mm Extra-Long Jaws | IP54 | Wireless + USB HID
The DataMet EXTRA LONG JAW E-FORCE CALIPER is a computerized large-capacity caliper for measuring widely separated surfaces and dimensions located far from an accessible workpiece edge. Measuring ranges extend to 3500 mm, while 400, 600 and 1000 mm extra-long jaws provide reach beyond conventional caliper geometry. The DataMet MICS system adds graphical measurement, tolerance evaluation, memory, Measuring HUB functions and multimode data transfer, while the MICRON versions provide resolution down to 0.0005 mm.
From 3.350,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Laboratory sub-micron bench micrometer non-rotating spindle
DataMet MICROTECH manufacturing Laboratory Tablet Sub-micron bench micrometer adopted to Industry 4.0
From 599,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageDataMet Laboratory sub-micron bench micrometer rotating spindle
MICROTECH manufacturing DataMet Laboratory Tablet Sub-micron micrometer adopted to Industry 4.0
From 499,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
Modbus DataMet Laboratory sub-micron bench micrometer non-rotating spindle
MICROTECH manufacturing Modbus DataMet Laboratory Tablet Sub-micron bench micrometer with non-rotating adopted to Industry 4.0
From 899,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageModbus DataMet Laboratory sub-micron bench micrometer rotating spindle
MICROTECH manufacturing Modbus Laboratory Tablet Sub-micron bench micrometer adopted to Industry 4.0
From 799,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Computerized scale with magnifier
DataMet Tablet computerized scale unit with 10x optical magnifier for precision non-contact measurements of large and small distances on films, plates, dies, and prints.
From 1.090,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Sub-micron computerized point micrometer wireless
DataMet Sub-micron computerized point micrometer MICROTECH with intelligent MICS measuring system has range up to 100mm, resolution 0.1 microns and accuracy up to 1 microns.
From 499,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
CertiMet Digital wall thickness gauge
MICROTECH manufacturing CertiMet wall thickness gauge for measuring thickness of tube walls.
299,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageDataMet Wall thickness gauge
MICROTECH manufacturing DataMet wall thickness gauge for measuring thickness of tube walls.
479,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageModbus Computerized Wall thickness gauge
MICROTECH manufacturing Modbus computerized wall thickness gauge for measuring thickness of tube walls.
779,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Computerized depth caliper double hook IP54
DataMet Computerized depth caliper double hook MICROTECH with Wireless and USB data output adopted to Industry 4.0.
From 449,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Computerized Thickness Gauge with Rollers
MICROTECH DataMet computerized thickness gauge with rollers are designed for measuring the thickness of moving objects such as yarns, wires, and films.
599,00 €
Select Options
DataMet Modbus Computerized Thickness Gauge with Rollers
MICROTECH DataMet Modbus computerized Thickness Gauge with Rollers are designed for measuring the thickness of moving objects such as yarns, wires, and films.
899,00 €
Select Options
DataMet Сomputerized bore caliper
DataMet Bore caliper for bore reading without removing the bar
From 1.080,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet computerized 2D thickness gauge
DataMet 2D wall thickness gauge developed and manufactured by MICROTECH. For control wall thickness and depth.
From 1.390,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Computerized small tip micrometer 4.0
Sub-micron small tip ( d 2 mm) computerized micrometer MICROTECH with Wireless & USB data transfer adopted to Industry 4.0
From 499,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet E-ink depth caliper double hook IP54
DataMet Digital double hook depth caliper IP54 MICROTECH with waterproof Swiss electronics
From 349,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Gun barell Pistol grip bore gauge Caliber
DataMet Gun barell Pistol grip bore gauge Caliber MICROTECH for measuring such calibers: 120, 122, 124, 125, 152, 155 with 6000 mm max depth.
From 2.440,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Shotgun bore gauge
DataMet Shotgun bore gauge MICROTECH for measuring diameter of shotgun with such calibers: 0.410 28 24 20 116 12 10 4 (range 10-26 mm) with 760 mm max depth. Can be equipped with dial, micron digital or computerized sub-micron indicator with Wireless data output.
1.200,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Sub-micron computerized non rotating micrometer head Industry 4.0
DataMet Sub-micron non-rotating micrometer head with Wireless & USB data transfer adopted to Industry 4.0
479,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet COMPUTERIZED GAUGE FOR EXTERNAL MEASURING BALL CONTACT (FORM D) INDUSTRY 4.0
Computerized precision micron gauge for external measuring with ball contact (form D) and Wireless & USB data transfer adopted to Industry 4.0
From 720,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
Modbus DataMet COMPUTERIZED GAUGE FOR EXTERNAL MEASURING BALL CONTACT (FORM D) INDUSTRY 4.0
Modbus Computerized precision micron gauge for external measuring with ball contact (form D) and Wireless & USB data transfer adopted to Industry 4.0
From 1.020,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet COMPUTERIZED GAUGE FOR EXTERNAL MEASURING CONE CONTACT (FORM A) INDUSTRY 4.0
Computerized precision micron gauge for external measuring with Wireless & USB data transfer adopted to Industry 4.0
From 630,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageModbus DataMet COMPUTERIZED GAUGE FOR EXTERNAL MEASURING CONE CONTACT (FORM A) INDUSTRY 4.0
Modbus Computerized precision micron gauge for external measuring with Wireless & USB data transfer adopted to Industry 4.0
From 930,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page