DataMet computerized indicator
0–12.7 to 0–200 mm | 0.0002 mm Resolution | Analog / Comparator / Digital Scales | 1.8″ Color Touchscreen | Wireless & USB HID | Li-Pol Battery
The DataMet computerized indicator is a linear indicator with a Swiss-made reading system of 0.2 μm resolution and a 1.8″ color touchscreen. Ranges run from 0–12.7 mm to 0–200 mm. It is built into bore gauges, thickness gauges, calibration stands and custom measuring equipment, where Go/NoGo limits, formula, compensation functions and wireless or USB HID data transfer replace manual reading and recording of a conventional indicator.
From 460,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Core computerized indicator
0–12.7 to 0–200 mm | 0.001 mm Resolution | 1.8″ Color Touchscreen | Go/NoGo Limits | Wireless & USB HID | Li-Pol Battery
The DataMet Core computerized indicator is a linear indicator with 1 μm resolution and a 1.8″ color touchscreen, available with ranges from 0–12.7 mm to 0–200 mm. It is built into bore gauges, thickness gauges, calibration stands and custom measuring equipment for tolerances given in microns. Go/NoGo limits, formula, compensation and wireless or USB HID data transfer remove manual evaluation and recording from the measuring point.
From 339,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet MODBUS PLC indicator
0–13 to 0–200 mm | 0.001 mm Resolution | ±2 to ±9 μm Accuracy | MODBUS RTU / RS-485 | Up to 247 Devices
The MICROTECH MODBUS PLC Indicator is a digital displacement indicator designed for direct integration into industrial MODBUS measurement and control networks. Available with measuring ranges from 0–13 to 0–200 mm, it provides 0.001 mm resolution and MODBUS RTU data output via RS-485. The long communication distance and support for networks with up to 247 devices make this version suitable for multi-point dimensional monitoring and automated inspection where conventional standalone indicators require manual reading or separate data interfaces.
From 369,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
CertiMet Digital indicator IP65
0–13 to 0–150 mm | 0.01 / 0.001 mm Resolution | IP65 | Narrow Housing | PRESET, mm/inch | Data Output
The CertiMet Digital indicator IP65 is an electronic indicator with a large screen and a special narrow housing for wider installation possibilities. Ranges are 0–13, 0–25, 0–50, 0–100 and 0–150 mm, with 0.01 or 0.001 mm resolution and IP65 dust and water protection. It is used to upgrade bore gauges, thickness gauges and measuring stands, where a narrow body and sealed construction are needed at the measuring point.
From 89,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
CertiMet Digital thickness gauges
Range options: 0–1 to 150–300 mm | Resolution: 0.001 mm | Jaw depth: 25–800 mm | Digital PRESET
This CertiMet digital thickness gauge uses a rigid deep frame and 0.001 mm indication to reach measurement points that ordinary calipers cannot access. The digital indicator provides direct metric or inch readings and PRESET setup. It is suited to workshop and laboratory inspection of sheet, plate, formed parts, and other components where the measuring position lies far from the edge.
From 299,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page