SwissMet Long internal jaw caliper IP67
SwissMet Long internal jaw caliper IP67 was developed and patented (Pat.US 10184772) by MICROTECH.
It gives possibility have 10 micron resolution and higher accuracy, then competitors calipers. MICROTECH also equipped this caliper with Force control module, that gives possibility measure all time with a same Force (8N).
From 349,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Rope caliper IP67
SwissMet digital rope caliper manufactured by Microtech have a measuring range of 0-150/200/300 and designed for precise measurement of rope, wire rope, cable, or other cylindrical objects. These calipers feature wide jaws or large measuring surfaces that eliminate errors caused by the unevenness of soft or braided rope. They are equipped with waterproof IP67-rated Swiss electronics, with a high resolution of 0.01 mm. Each caliper is supplied with a calibration certificate compliant with ISO 17025 (Ilac MRA) standards, ensuring traceability and measurement reliability.
From 330,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageSwissMet Wireless Micron Bi-Force Long internal jaw caliper IP67
SwissMet Wireless Micron Bi-Force Long internal jaw caliper IP67 was developed and patented (Pat.US 10184772) by MICROTECH.
It gives possibility have 1 micron resolution and higher accuracy, then competitors calipers. MICROTECH also equipped this caliper with Force control module, that gives possibility measure all time with a same Force (8N).
From 549,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Micron Bi-Force Rope caliper IP67
ROPE SwissMet Wireless micron IP67 digital caliper manufactured by Microtech have a measuring range of 0-150/200/300 and designed for precise measurement of rope, wire rope, cable, or other cylindrical objects. These calipers feature wide jaws or large measuring surfaces that eliminate errors caused by the unevenness of soft or braided rope. They are equipped with waterproof IP67-rated Swiss electronics, with a high resolution of 0.001 mm.
From 530,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
CertiMet digital Offset centerline caliper IP54
Offset centerline caliper IP54 These offset centerline digital calipers has 10-160; 10-210; 10-310; ranges and measuring system with IP54 water proof.
From 269,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Bi-Force caliper IP67
0–150 / 200 / 300 mm | 0.01 mm Resolution | ±10 / ±10 / ±20 μm Accuracy | 8 N External / 4 N Internal Force | IP67 | Wireless MDS + HID
The WIRELESS SwissMet IP67 Bi-FORCE Caliper is a digital stainless-steel caliper for dimensional measurements requiring defined measuring force and wireless data transfer. Its mechanical Bi-FORCE control module provides 8 N for external measurements and 4 N for internal measurements, reducing dependence on operator-applied force. Three measuring ranges up to 300 mm are available, with 0.01 mm resolution, IP67 protection, PRESET function and multimode wireless data output. Upper and lower carbide jaws are available as an optional modification.
From 219,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
CertiMet Digital depth caliper double hook IP54
MICROTECH manufacturing Double hook depth calipers with IP54 protection with optimal price level.
From 99,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Digital Flat internal jaws caliper ip67
SwissMet Long internal jaw calipers with IP67 big screen Swiss electronics.
From 679,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageDataMet E-INK DEPTH CALIPER IP54
E-ink Depth Caliper MICROTECH with Wireless and USB data output adopted to Industry 4.0.
From 299,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Digital caliper IP67
MICROTECH manufacturing carbide precision calipers with IP67 proof
MICROTECH carbide calipers has upper and lower carbide tips. These calipers has 150, 200, 300 mm (6, 8, 12 inch) ranges and has Swiss electronic measuring system with IP67 water proof. This caliper is equipped with Swiss-made electronics, features a large 12 mm digit display with a refresh rate greater than 10 readings per second, and offers a maximum slider speed up to 2.5 m/s. The body is made of stainless steel with hand-finished measuring surfaces achieving roughness Ra<0.32μm. This caliper have IP67 water proof
From 219,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product pageSwissMet Digital small grooves caliper IP67
SwissMet Small grooves caliper gives possibility to measure small internal diameters from 3mm, very small internal grooves, grooves depth (0-12mm) and external sizes.
From 549,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Bi-Force Carbide caliper IP67
0–150 / 200 / 300 mm | 0.01 mm Resolution | ±10 / ±10 / ±20 μm Accuracy | 8 N External / 4 N Internal Force | Upper & Lower Carbide Jaws | IP67 | Wireless MDS + HID
The CARBIDE WIRELESS SwissMet IP67 Bi-FORCE Caliper is a rechargeable digital caliper for dimensional measurements requiring defined contact force, carbide measuring jaws and wireless data transfer. Its mechanical Bi-FORCE control module provides 8 N for external measurements and 4 N for internal measurements, reducing dependence on operator-applied force. Three measuring ranges up to 300 mm are available, with 0.01 mm resolution, IP67 protection, PRESET function and multimode wireless data output.
From 279,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Digital external knife-edge caliper IP67
0–300 / 500 / 600 mm | 0.01 mm Resolution | ±30 μm Accuracy | IP67 | PRESET |
The SwissMet IP67 caliper external knife-edge jaws is a stainless-steel digital caliper for external and internal dimensional measurement over ranges up to 600 mm. Its extended jaws and external knife-edge measuring geometry provide access to recessed, stepped and restricted external features where conventional short, broad caliper jaws cannot contact the required surface correctly. Upper jaws with measuring tips support internal measurements above 10 mm, while Swiss electronics provide 0.01 mm resolution, PRESET and IP67 protection.
From 339,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Digital external knife-edge caliper IP67
0–300 / 500 / 600 mm | 0.01 mm Resolution | ±30 μm Accuracy | IP67 | Wireless MDS + HID
The WIRELESS SwissMet IP67 caliper external knife-edge jaws is a stainless-steel digital caliper for external and internal dimensional measurement over ranges up to 600 mm. Its extended jaws and narrow external knife-edge geometry provide access to recessed, stepped and restricted measuring locations where conventional short or broad jaws cannot contact the required surfaces correctly. Swiss IP67 electronics, PRESET and integrated multimode Wireless data transfer make this version suitable for large-part measurement with direct digital result transmission.
From 419,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Digital wireless Inside point caliper IP67
SwissMet wireless Inside point digital caliper 500, 1000 mm (20,40 inch) ranges and 150/300 mm jaws with 3mm external pins,Big screen electronic module has IP67 waterroof, 0.01mm / 0.0005 inch resolution, mm/inch conversion and PRESET function.
From 999,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
CertiMet Preset digital external knife-edge caliper IP54
MICROTECH manufacturing CertiMet knife-edge calipers with IP54 water proof with optimal price level. These calipers with with measuring tips have measuring range 0-300mm (0-12 inches), 10 micron (0,01mm) resolution and measuring jaws 40 (upper with scribers) and 60mm (lower for internal and external measuring).
189,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Knife edge inside caliper IP67
MICROTECH manufacturing SwissMet Knife edge inside caliper with IP67 protection.
From 469,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Micron Bi-Force Knife edge inside caliper IP67
MICROTECH manufacturing SwissMet Wireless Micron Bi-Force Knife edge inside caliper with IP67 protection.These Knife edge inside calipers has 1 micron (0,001mm) resolution. It’s using for deep internal measuring.
From 669,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet Computerized e-Force external knife-edge caliper Industry 4.0
DataMet Computerized e-Force upper jaws knife-edge caliper MICROTECH with intelligent MICS measuring system and multi Force 1-20N control and long range Wireless data transfer adopted to Industry 4.0
449,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
DataMet e-Force Micron external knife-edge caliper Industry 4.0
0–300 / 500 / 600 mm | 0.0005 mm Resolution | ±12 / ±15 / ±18 μm Accuracy | 1–20 N E-FORCE | IP54 | Wireless + USB HID
The MICRON DataMet E-FORCE caliper external knife-edge jaws is a computerized precision caliper for external and internal dimensional measurement over ranges up to 600 mm. Its long jaws and external knife-edge measuring geometry provide access to features that are difficult to reach with conventional flat caliper jaws, while the 1–20 N E-FORCE system allows the measuring force to be selected, displayed and controlled. A 0.0005 mm reading system, 2.0″ color touchscreen and integrated DataMet functions support high-resolution inspection and measurement-data handling.
From 499,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
Modbus DataMet Micron e-Force external knife-edge caliper Industry 4.0
0–300 / 500 / 600 mm | 0.0005 mm Resolution | ±12 / ±15 / ±18 μm Accuracy | 1–20 N E-FORCE | External Knife-Edge Jaws | IP54 | MODBUS RTU + Wireless + USB HID
The MODBUS MICRON DataMet E-FORCE caliper external knife-edge jaws is a computerized precision caliper for external and internal dimensional measurement over ranges up to 600 mm. Long jaws and narrow external knife-edge geometry provide access to recessed, stepped and restricted external features, while electronic 1–20 N E-FORCEcontrols contact force. The MODBUS version adds RS-485 MODBUS RTU data output for integration into industrial measurement and control systems while retaining Wireless and USB HID data transfer.
From 599,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Micron Bi-Force external knife-edge caliper IP67
0–300 / 500 / 600 mm | 0.001 mm Resolution | ±12 / ±16 / ±20 μm Accuracy | 8 N External / 4 N Internal Bi-FORCE | External Knife-Edge Jaws | IP67 | S_connect Data Output
The MICRON SwissMet IP67 Bi-FORCE caliper external knife-edge jaws is a precision digital caliper for external and internal dimensional measurement over ranges up to 600 mm. Long jaws and narrow external knife-edge measuring geometry provide access to recessed, stepped and restricted external features, while upper measuring tips support internal measurements above 10 mm. The mechanical Bi-FORCE system applies 8 N for external and 4 N for internal measurements, providing defined measuring force for both measurement
From 449,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Wireless Micron Bi-Force external knife-edge caliper IP67
0–300 / 500 / 600 mm | 0.001 mm Resolution | ±12 / ±16 / ±20 μm Accuracy | 8 N External / 4 N Internal Bi-FORCE | IP67 | Wireless MDS + HID
The WIRELESS MICRON SwissMet IP67 Bi-FORCE caliper external knife-edge jaws is a precision digital caliper for external and internal dimensional measurement over ranges up to 600 mm. Long jaws and narrow external knife-edge measuring geometry provide access to recessed, stepped and restricted external features, while upper measuring tips support internal measurements above 10 mm. Mechanical Bi-FORCE applies 8 N externally and 4 N internally, while multimode Wireless enables direct measurement-data transfer without a data cable.
From 499,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page
SwissMet Micron external knife-edge caliper IP67
Wireless micron knife-edge caliper with Swiss IP67 electronics. This caliper can have optional Wireless data transfer
From 399,00 €
Select OptionsThis product has multiple variants. The options may be chosen on the product page